Yamaha DTX-PRO Firmware Update Manual page 4

Troubleshooting
The power was turned off or the USB flash drive was removed before the installation

process could be completed.
You need to re install the program. Go back to the beginning of t he procedure
and try installing again.
An error message appears, and you cannot install the f irmware.

Please check that:
The USB flash drive is inserted correctly.
・
There is no dust or dirt on the USB termina l.
・
The insta llat ion program file is saved at th e root of the USB flash drive.
・
The data in the USB f lash drive or the USB f lash driv e it self is not corrupted.
・
You have the correct file for your drum module.
・
The same problem does not occur with a different USB flash driv e.
・
Main enhancements
v1.00 ➜ v1.01
Added the DTX502 se ries drum kits to the Trigger Setup Wizard.
・
Fine-adjust ed the ME NU/Tr igger/Crossta lk settings. Since the se ttings are
・
slightly different from those of version 1. 00, readjust the crosstalk sett ings
if necessary.
Added -6dB, -12dB, a nd 18dB to the MENU/Utility /Output Gain settings.
・
Added PA-HP to the M ENU/Utility/Input Out put/AUX In/Input Mo de setting s.
・
Added AUX In Gain to the MENU/Ut ility/Inp ut Output settings.
・
Changed setting rang es for some parameters.
・
Updated the disp lays on some screens.
・
Fixed m inor problems.
・
Manual Development Group
©2020 Yamaha Corporation
Published 11/2020
DT X - P RO F i r m w a r e U p d a t e G u i d e
YJ-A0
4