Do you have a question about the boost and is the answer not in the manual?
Questions and answers
Melissa McCormick
March 28, 2025
I don't know what's wrong with my Reid Boost E scooter, I can't turn it on
2 comments:
Mr. Anderson
March 28, 2025
If your Reid Boost E-Scooter won't turn on, possible issues could include:
1. The scooter is not fully assembled or the screws are not properly locked using the hex wrench. 2. The battery may be discharged; try charging it for 5–6 hours. 3. The power switch may not be turned on from both sides. 4. There may be an issue with improper operation or a fault that can be checked using the Bluetooth app diagnostics.
Ensure all installation steps were followed and check the battery and switch status.
This answer is automatically generated
Melissa
March 28, 2025
@Mr. Anderson I can't turn it on to connect to the app, it is charged
This manual applies to your Reid Boost electric scooter. Please read the manual carefully to ensure that: use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
What Comes In The Box Components Dashboard Folding hook Throttle Components User manual x1 Front light Brake lever Screw M5 x 5 Hex wrench M5 x1, M3 x 1 Charger adapter x1 Silicone pedal Folding mechanism Tail lamp Disc brake Ambient light Front fender Kickstand...
Control Panel Installation Guide Bluetooth status Headlight status Install the brakes to the correct position with the Hex wrench (M5 in the tool bag). Battery Speed gear Speed Lock Power switch Maximum mileage Cruise control Control Instructions: Use the control panel to control the scooter, the specific features are as follows: Long press the power switch button to turn on the eScooter, also turning on the front light, ambient lighting, tail light and rear brake light.
Page 7
2. Hold the scooter upright, to ensure that the lock will not be affected, please keep the folding-spanner 3. Fasten the scooter standpipe and fold out the kickstand. 4. Install the handlebar to the standpipe. (the blue part of the image) at the bottom. Pull the folding-spanner to the top, then the scooter is completely locked. 5.
Please be vigilant and drive at low speeds before entering unfamiliar terrain. Do not lend your Reid eScooter to a person who has never ridden it before to avoid injury. If you do lend your Open the rubber cap.
How To Ride *There are risks of falling and injury when riding, so please wear a helmet and protective gear as shown in the 3. Once you have the electric scooter moving above 4. Releasing the throttle will slow you down gradually, picture.
Riding Safely Do not press the throttle whilst Avoid obstacles when driving. walking with the eScooter. Please avoid riding in Do not ride quickly over uneven surfaces. Keep the rain. a speed between 5km/h and 10km/h and bend your knees slightly to ensure maximum safety. Do not hang any heavy items on Keep both feet on the deck whilst Do not ride through doorways.
Page 12
Warning Reminder Do not try to do any dangerous movements. Forbidden to step or tread on the Forbidden to press the disc brake. Forbidden to drive on the road or Forbidden to rotate the handle strongly back mudguard. in crowded residential areas. while driving with high speed.
Page 13
Folding and Transportation Transporting Fold Open After the e-scooter has been folded successfully, use one hand or two to hold the folding-level to transit. Put the safety-lock (the red part of the image) up whilst holding the steer tube. Then, open up the folding spanner (the blue part of the image) and aim it at the bell and fender hook.
If there is a mark on the body of your Reid eScooter, wipe it with a small amount of water with a soft cloth. If it is malfunction, or even a risk of fire.
Parameter Table Height: The height of the body to the ground. Endurance: Electric scooters are fully charged, load is 100kg, ambient temperature is 25°C without wind, maximum speed is 25kph. However, the actual cruising range varies with driving habit, roads, ambient temperature, wind speed and other factors. Note: Data and parameters vary by mode.
Contact Us wanted by the authorities. If you have any questions about the Reid Boost eScooter, we would be more than happy to answer them. Please contact us at: www.reidbikes.com/contactus/...
Page 19
Pairing Your eScooter The Reid eMobility app is available to download in the App Store and Google Play. You can also scan To pair your phone to your eScooter, please download the app and follow these instructions: Open the app, the QR code below to download and install the app.
Page 21
Follow us on Instagram @reidbikes to experience the best of life on two wheels and more. We post everyday with We have dedicated Facebook pages for many of the countries we're found in. These pages will give you more Reid new products, epic adventures and the latest eScooter news! We love sharing from our community of Reid Riders information specific to your country, so follow us to keep with the all the latest happenings.
Page 22
TikTok YouTube Follow us on TikTok @reidbikes for awesome eScooter videos and more! We post regularly with new eScooter Subscribe to our Youtube channel for in-depth maintenance and repair guides, as well as the most inspiring content, awesome adventure videos and the latest TikTok trends. ride videos from around the world to help you plan your next adventure.
Page 23
From city scootering to new adventures, these stories can teach and inspire you to make the most of your Reid. If you would like to become our Reid Rider of the month, start sharing your Reid snaps on Instagram using #reidbikes and we might be in your DM's soon.
Page 25
Recycle Reuse If you can't recycle then you can always reuse! 95% of the packaging we use is recyclable - but if you don't Almost everything I'm packed in is recyclable, except a few plastic pieces needed to protect me on my journey to you. have recycling facilities near you, then you can always repurpose.
Page 26
We believe it is important to be constantly improving our sustainability practices so that the environments we love to Reid have partnered with the amazing Eden Reforestation Projects who plant a tree on our behalf for every Reid branded product we sell.
Need help?
Do you have a question about the boost and is the answer not in the manual?
Questions and answers
I don't know what's wrong with my Reid Boost E scooter, I can't turn it on
If your Reid Boost E-Scooter won't turn on, possible issues could include:
1. The scooter is not fully assembled or the screws are not properly locked using the hex wrench.
2. The battery may be discharged; try charging it for 5–6 hours.
3. The power switch may not be turned on from both sides.
4. There may be an issue with improper operation or a fault that can be checked using the Bluetooth app diagnostics.
Ensure all installation steps were followed and check the battery and switch status.
This answer is automatically generated
@Mr. Anderson I can't turn it on to connect to the app, it is charged
How do I reset it
How to reset blue tooth password