P.I.T. trademark. In terms of sales, hot air guns occupy one of the leading positions. Each letter and number in the model designation has the meaning. For example, PHG2000-C PHG – hot air gun Model PHG2000-C 2000 – engine power C –...
Page 4
Note: ■ – available □ – not available MODEL ■ ■ ■ ■ PHG2000-C □ HOT AIR GUN PHYSICAL FORM 1. On/off control / mode switch 5. Round head piece 2. Air outlet 6. Glass head piece 3.
HOT AIR GUN RULES OF OPERATION On / off Turn on the tool by putting the on/off control 1 in one of the positions: - I position – flow rate 250 l / min, air temperature 50°C; - II position – flow rate 350 l / min, air flow temperature can be adjusted from 350 to 600 - III position –...
HOT AIR GUN MAINTENANCE Maintenance of the power tool must be performed only by qualified personnel of authorized technical service centers. Maintenance performed by unskilled personnel can cause tool breakage and injury. For example: internal wires may be incorrectly stacked or clamped. When servicing a power tool, use only specified replacement of consumable parts, head pieces, accessories.
Page 7
HOT AIR GUN TERMS OF WARRANTY SERVICE 1. This Warranty Certificate is the only document that confirms your right to free warranty service. Without presenting this certificate, no claims are accepted. In case of loss or damage, the warranty certificate is not restored. 2.
Need help?
Do you have a question about the PHG2000-C and is the answer not in the manual?
Questions and answers