Lifesaver jerrycan Quick User Manual

Quick User Guide
INSTRUCTIONS
This quick user guide should be used in conjuction with the
Instruction Manual provided with your LIFESAVER
FIRST USE
ROUTINE USE
© 2007-2013 LIFESAVER
granted. LIFESAVER is a registered trade mark. The following are trademarks of the LIFESAVER
®
of companies:- FOR A HOSTILE WORLD™, FILL.PUMP .DRINK™, FAILSAFE™
Priming - Unscrew and remove pump from the
1
LIFESAVER
®
or water from any clean source. Screw pump firmly
back into place. Let stand for 5 minutes.
Pump & Discard - Turn tap to open position. Untwist
2
pump handle and pump untill water starts to flow.
Discard first 2 litres. Your LIFESAVER
ready to use.
Caution! - When filling the LIFESAVER
1
water take care to keep the tap area clear. Do not
unscrew tap in the field.
Filling - Unscrew and remove pump. Fill with water
2
from tap, camp, river, lake, stream or other source.
Use the cleanest water source available. This will
prolong the life of your LIFESAVER
Pumping - Turn tap off. Twist pump handle to unlock
3
and pump a few times. Twist pump handle to lock
closed.
Drinking - Turn tap to open postion and clean sterile
4
drinking water will flow. Pump again to improve flow.
Turn tap off.
Operation & Storage - Your LIFESAVER
5
will work in any orientation. As the water gets low
changing the orientation will improve the flow rate.
Protect from freezing and shocks.
Systems. All rights reserved. Patents and registered designs pending and
®
jerrycan. Fill with tap water, camp water
jerrycan.
®
jerrycan is
®
jerrycan with
®
jerrycan.
®
jerrycan
®
group
®