Hide thumbs Also See for JERRYCAN:

Advertisement

Quick Links

ESSENTIAL
FOR SURVIVAL
LIFESAVER
JERRYCAN
USER
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JERRYCAN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lifesaver JERRYCAN

  • Page 1 ESSENTIAL FOR SURVIVAL LIFESAVER JERRYCAN USER MANUAL...
  • Page 2: Table Of Contents

    Activated Carbon Filter Maintenance and Care How to clean the Jerrycan when outdoors How to clean the Jerrycan when at home How to remove and re-fit the filter cartridge How to check your filter is working correctly Membrane integrity check...
  • Page 3: Priming

    As flow rate reduces, pump to maintain flow. • Discard water. • As the water level gets low, lay Jerrycan on side (tap facing down) and • Fill with clean water and pump 10–15 times. pump to maintain flow as needed.
  • Page 4: Caution

    A PRESSURE VESSEL • Keep the membranes of the cartridge in the Jerrycan hydrated by storing at least 2 inches / 5 cm of water in the Jerrycan at all times whilst keeping the Jerrycan sealed with the pump and tap in place.
  • Page 5: Maintenance And Care

    • Refill the Jerrycan ¼ full with the cleanest water available and re-fit the pump. Swill the water around the Jerrycan, turning the Jerrycan upside • Remove the filter from the Jerrycan by removing the tap and lifting the filter down to distribute the water around the Jerrycan. Continue for up to out.
  • Page 6: How To Check Your Filter Is Working Correctly

    • If water flow is normal but very slow, despite the Jerrycan being ½ full at How to check your filter is working correctly either the horizontal or vertical position, clean the Jerrycan as dirt and The ultra filtration membranes have been integrated into a robust cartridge debris maybe causing slower water flow.
  • Page 7: Maintaining The Dome Valve

    Keep the membranes of the cartridge hydrated by storing at least 2 inches / 5 cm of water in the Jerrycan at all times whilst keeping the Jerrycan sealed with the pump and tap in place. Failure to do so will cause the membranes to dry out, the nano-filter pores to close and the system to shut down.
  • Page 8: Shelf Life

    If still sealed in the condition it was • Store at least 2 inches / 5 cm of water in the Jerrycan at all times. purchased, the shelf life of the product will be up to 10 years from the date of purchase.
  • Page 9: Extreme Temperatures

    • Ensure the pump and cap are correctly sealed. • Pack the Jerrycan securely in the hold or within hand luggage. • When destination is reached pour 2 inches / 5 cm of water into Jerrycan. • Perform a membrane integrity check before re-use (page 11).
  • Page 10: Performance And Technical Data

    We reserve the right to make improvements and/or modifications to the equipment herein. Exceeds EPA Guidelines for microbiological purifiers: © 2020 Icon LifeSaver Ltd. All Rights Reserved. Patent registered designs Bacteria retention*** >99.9999% (Log 6) pending and granted. LifeSaver ®...
  • Page 11 ESSENTIAL CONTACT DETAILS www.iconlifesaver.com E: info@iconlifesaver.com T: +44 (0) 1206 580 999 SLI0015-4 © 2020 Icon LifeSaver LTD. All rights reserved...

Table of Contents