Finn BB302 Troubleshooting Manual

FINN Models: Bark Blowers 302 (BB302) and 5-Series (MB50)
This troubleshooting guide is designed to illustrate and explain the steps necessary to check your remote
control unit that came with your BB302 or MB50 should it stop working. Follow this guide to reset your remote
or to establish the malfunction. Following these steps could eliminate the problem.
Use this guide fi rst before returning the remote to Finn. Most malfunctions can be eliminated through the
solutions provided. After attempting to use this guide to fi x the problem, then contact Finn customer service by
calling 1-800-543-7166 (Monday - Friday, 8 am to 5 pm, EST).
Remote
Opera on Lights
Operation Lights
TX - indicates that the remote is transmitting signal
RX - indicates that the remote is receiving signal
Error Light - indicates that the remote is not operating correctly
Battery Light - indicates that the power level of the remote is not correct in some way

First Step - Turn the Remote On

To turn the remote on, push and hold the green POWER button, which is located on the back of the
remote. Release the button.
If the TX (transmit) and RX (receive) LEDs fl ash rapidly (10 times per second), then the remote is
synched to the machine. The machine has power and is ready to use.
Check the Remote
Does the TX (transmit) LED fl ash rapidly (10 times per second)?
If yes, the remote is ready to use. Move forward to the Receiver Troubleshooting section of this guide.
If the TX (transmit) LED DOES NOT fl ash rapidly (10 times per second), continue on to the next part
of the
Troubleshoot Remote
BB302 MB50 RCTG MU0407
TROUBLESHOOTING GUIDE
section.
REMOTE CONTROL
Green POWER
Bu on