How To Format, Integrate And Use Programs From Other Sources - TB F-SCAN5 Instruction Manual

How to format, integrate and use programs from other sources

A touch on the button ABC opens the menu to reach and operate frequency programs generated outside the
F-SCAN5. Up to 460 sets, of up to 30 frequencies each, can be transferred to the "ABC" memory block using
either the softw are F-SCANT3, or a common terminal progra m.
As a factory setting the "ABC" f unction is locked. A release code can be acquired from the factory or from an
F-SCAN sales point by e mail.
The frequency programs must be w ritten w ith a text editor in the follow ing format:
(PROGRA MM 1)10,100,1000,10000;
(PROGRA MM 2)20,30,40,50,60,100;
The program name (maximum of 20 characters – letters of the alphabet only) must be set in parenthesis. It is
follow ed by 1 to 30 frequency values, separated by comma. The end of the sequence has to be marked by a
semicolon " ; ".
A carriage-return-line-feed = 13-10 must separate the program lines.
As soon as the list of frequency programs is generated and transf erred to the F-SCAN5, it can be accessed on
the unlocked menu "ABC".
Few er properties than in the menu "123" can be assigned to individual frequency values here. A change of the
timer w ill be valid for all frequencies stored in the memory block of 460 programs. The amplitude of square
signals can be adjusted up or dow n w ith the amplitude slider.
- 28 -