The Menu 123 - TB F-SCAN5 Instruction Manual

The menu 123

The menu "123" must be used to create and run individual programs w ith the ability to enter random
frequencies in the range from 0.01 Hertz up to 15 MHz (Megahertz).
The F-SCAN5 offers 100 storage positions f or programs of between 1 and 50 frequencies. The end of each
program is a value of 0 Hertz (Hz).
Each program can be named individually.
A number of parameters can be assigned to each frequency value:
- Run time (TIME)
- Signal form (Auto, Sine, Square Half Wave, Square Full Wave, SMA RT and OFF)
- WOBBLE (Output sw ings around the target frequency)
- ENV ELOP (Amplitude oscillates betw een 0Vpp and maximum)
- Amplitude (signal strength) of sine w ave and square wave.
All frequencies are listed on the right hand side of the display in groups of 10. If a frequency is a result of a
DIRP, the associated measured value (MV) is also indicated. The selected frequency is displayed in orange.
The vertical arrow s can be used to show up to 5 blocks of memorized frequencies of a program.
- 10 -