TB F-SCAN5 Instruction Manual page 12

To cut, copy or paste an existing entry, just touch the program line and re main for approximately tw o seconds
until the "copy-paste-cut" sub menu opens.
After this, release the touch and proceed w ith the intended function.
COPY copies the entry into the paste buffer.
PASTE copies the contents of the paste buffer into a selected memory position.
CUT deletes the entry.
COPY TO DUO copies the selected program to the "DUO+" section so that a standard single channel program
can also be used as DUO, TRIPLE or QUA D application.
To close the "copy-paste-cut" sub men, press the
Exa mple for copying the entry from progra m 1 into program 5:
- touch program line 1 (here DIRP Test) and remain for 2 seconds
- when "copy-paste-cut-Copy to DUO" sub menu opens, release and press "COPY".
- Select another program line, for example "5:" and keep it touched until the sub menu opens.
- Touch " PASTE".
After this procedure, the program "1:" and program "5:" have the sa me name and contents.
X icon top right.
- 12 -