Nokia RM-14 Service Tools And Service Concepts page 7

RM-14
Service Tools and Service Concepts
Replacing the SIM interface:
1) Remove the two screws on top of the tower holding the SIM interface.
2) Replace the SIM interface. Make sure the PWB is mounted with the pads downward
towards the pogopins in the tower.
3) Replace the top part over the SIM interface, product code 0780506 .
MJ-34 Module Repair
Jig
ISSUE 1 11/04
0780346
COMPANY CONFIDENTIAL
Copyright © 2004 Nokia. All Rights Reserved.
Nokia Customer Care
The MJ-34 module
repair jig is designed
for regional service
centers to allow
component level
troubleshooting,
testing and analysis.
Note! The supply
voltage for the MJ-
34 has to be kept
within the range 8-
12V when using the
build in the regulator.
When bypassing the
regulator (IMEI
rewrite) the voltage
must be kept below
5,4V.
7