Nokia RM-14 Disassembly And Reassembly Instructions page 7

RM-14
Disassembly and Reassembly Instructions
15.) Unlock the UI Module by turning it a bit.
17.) Be carefully when removing the Rotator Flex.
Note the right position of the contacts when assem-
bling.
19.) The same procedure on the other side.
21.) Turn over the C-Cover Assy carefully. Do not
damage the Flex Assy.
ISSUE 1 11/04 COMPANY CONFIDENTIAL
Copyright © 2004 Nokia. All Rights Reserved.
Nokia Customer Care
16.) Now, lift the UI-Module as shown in the picture.
Take care not to damage the Rotator Flex.
18.) Use a slotted screwdriver to open the C-Cover
clips.
20.) Move the C-Cover Assy a bit to the left as
shown in the picture.
22.) Open the Display Connector carefully by using
the SRT-6.
7