Pioneer XV-DV515 Operating Instructions Manual page 33

a o_ Problem eo
Timer indicator is
blinking and the
system will not switch
on.
PROGRAM.
Problem
年２月２５日 火曜日 午後４時５５分
mpted to enter a track or folder for
The disc is ejected
ep in the program list.
automatically after
loading.
P 0 - 0 0 0 0
d
(cursor up/down) to select a
folder, then press ENTER.
Playback is not
WMA/MP3 discs only:
To select an
possible.
dual track within a folder, use the
rsor up/down) buttons to select the
Picture playback stops
then press , then use
and the operation
r up/down) to select a track. Press
buttons cannot be
phones, the • Expanded – Creates an extra wide stereo
R.
used.
nges to field
• TV Surr. – Designed for mono or stereo TV
m it reverts
Settings are canceled. • When the power is cut due to power failure or by unplugging the power
P 0 - 1 5 3 7
broadcasts and other sources
• Sports – Designed for sports and other
d, press
No picture/No color.
he display to prompt you after
programs based on commentary
rround' or
g each selection. If you make a
• Game – Creates surround sound from
ress CLR to delete the last (most
video game sources
programmed track.
• ExPwrSurr. (Extra Power Surround) –
Screen is stretched or
urround
Gives additional energy and width to
aspect does not
at step 2 to build up a program
stereo sources
change.
• Virtual – Creates the impression of
m list can contain up to 24 steps.
When recorded on a
e used with
surround sound from just the front
VCR or passed through
a variety of
ay the program list, press
speakers
an AV selector, there is
.
• 5ch Stereo – Designed to give powerful
disturbance in the
play remains active until you press
surround sound to stereo music sources
playback picture.
clear the playlist (see below), eject
r switch off the player. CD won't play
he program list • You can't use the Advanced Surround
modes with high sampling rate
clear the program list to program a
88.2 / 96 kHz sources.
Downloaded From TheatreSystem-Manual.com Manuals
• You can use any of the above Advanced
sc is playing, press
Surround modes with any type of source.
All manuals and user guides at all-guides.com
.fm 45 ページ ２００３年３月４日 火曜日 午後 ２時 分 Remedy
• Unplug the unit, then plug back in. Wait for one minute then switch on.
• Make sure the fan at the rear of the unit is not being blocked.
• Check that the speakers are connected correctly.
• Make sure the voltage of the mains power source is correct for the
model.
• If the problem persists, take it to your nearest Pioneer
authorized service center or your dealer for servicing.
Remedy • You can save program lists for up to 24
discs. After that, the oldest one is
• Clean the disc.
replaced with the new one saved.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see DVD Video regions Searching a disc
• Allow time for any condensation inside the player to evaporate. Avoid
You can search DVD discs by title or chapter
using the player near an air-conditioning unit.
number, or by time. CD/Super VCDs can be
• If the disc is loaded upside down, reload the disc with the label side face searched by track number, and Video CDs by
track number or time. WMA/MP3 discs can
up.
be searched by folder or track number.
• Press
1 During playback, press HOME MENU
• Switch the power off once, then on again using the front panel
and select 'Play Mode'.
STANDBY/ON
2 Select 'Search Mode' from the list of
functions on the left.
cable, settings will be canceled.
The search options that appear depend on the
kind of disc loaded. The screen below shows
• Check that connections are correct and that plugs are inserted fully.
the DVD search options.
• Check the instruction manual of the TV/monitor to make sure the TV/
monitor settings are incorrect.
Play Mode
• The TV Screen setting is incorrect. Set the TV Screen option to match the
A-B Repeat
TV/monitor you're using (see TV Screen on page 62).
Repeat
Random
Program
• This system uses copy-protection technology which may prevent
Search Mode
recording or cause picture problems when connected through a VCR or AV
selector. This is not a malfunction.
3 Select a search mode.
4 Use the number buttons to enter a
• Set the PhotoViewer menu option in the Initial Settings menu to Off to
title, chapter, folder or track number, or a
be able to play some copy-protected CDs. See also PhotoViewer
time.
Play Mode
A-B Repeat
(stop).
Repeat
Random
04
(stop), then (play) to start playback again.
button.
Title Search
Chapter Search
Time Search
Title Search
Input Chapter
Chapter Search
0 0 1
Time Search
05
on page 77).
81
on page 69.
En
1