Nokia Customer Care
6. Remove the PWB
Gently lift and rotate the PWB from the assembly, so that the side key flex cable is
removed along with the PWB.
7. Remove the Side Key Flex Cable
Using the SRT-6 opening tool, remove the side key flex cable from the PWB by opening
the connection. Do not damage the connector.
8. Remove the Keymat
Press the keymat out of the C-cover from behind to remove it.
Note for Assembly: Be careful of alignment pin that retains the keymat in C-cover.
Issue 1 10/2005
©2005 Nokia Corporation
Disassembly/Assembly
Side key flex cable
Alignment pin
Company Confidential
2255 (RM-97)
Page 7