Nokia Customer Care
Issue 1 - September 2006
Baseband Description and Troubleshooting
Reset mode is entered and the watchdog
starts. VCORE is enabled, and provides
power to the D2800.
End of settling time (only if Vbat >Vcoff+)
VFlash1 regulator is enabled.
VR3, VANA, VIO are enabled. PURX is held
low.
D2800, MCU, and DSP are reset; PURX
releases.
Figure 3:
Company Confidential
6275/6275i (RM-154)
Page 7