Brabantia BBEK1131 Instruction Manual page 8

INSTRUCTIONS FOR CONTROL PANEL
Button-Switch
After the product is plugged in, the machine emits a beep, the LED light on the product panel is
always on for one second, and then goes out, the light
the shutdown state. Press the button
light flashes, the digital screen displays "- - / 180°C", the machine enters the standby state.
When the product is working, press the button
light is always on. Press the button
flashes. When the product is working or in standby mode, long press the button
seconds, the machine stops working, and the light
Button-Menu
In the product standby state, press the function selection key
and starts working. Or each time the function selection key is pressed, the working mode is
switched cyclically, the corresponding mode light flashes, the 6 menu mode already contains
the default temperature and time, after selecting the function mode, press the key
the original flashing state becomes constant light, the machine starts to work.
Attention:
1. In order to achieve better food performance, the machine must be preheated before
placing the ingredients: plug in, press
will sound 5 times when the temperature of the machine reaches 180°C, indicating
preheating finish.
8
, the function key LED light is always on,
, the machine starts to work, and
again, the machine stops working and the light
is half bright
to automatically preheat, and the buzzer
is half on, and the product enters
, it enters the defrost mode
the
the
for 1.5
again,