Pax Technology A980 Quick Start Manual

PAX TECHNOLOGY INC.
Contents Checklist
1
Please check the components after unpacking. If any of
the components are missing, please contact the dealer.
Contents Qty.
A920 POS Terminal 1
Paper Roll 1
Power Cord 1
Power Adapter 1
Product Description
2
LCD Screen
EMV Reader
2
Printer Hatch
MAC Address
Label
Battery Cover
Hatch
Contactless Area
Magnetic Stripe
Reader
Front Facing
Camera
Volume -
Power Button
USB Type-C Port
Note: Product images shown may be different than actual
product recieved.
Product Description CONT'd
Contactless Area
5MP Rear Camera
Optional Base
POGO PINS
Volume +
Power Button
SAM, SIM, & Micro SD Card
3
1. Remove the back cover.
2. Gently remove the battery from the device.
3. Insert the card into the relevant card slot.
4. Replace the battery and back cover.
Power
4
POWER ON:
Press and hold the power button down for 3-5 seconds
and then release.
POWER OFF:
Press and hold the power button down for 3 to 5
seconds and then release.
Lithium Ion Battery
5
• Do not use or place the battery in direct sunlight
and/or smokey, dusty environments.
• Do not strike, squeeze, and/or tread on battery.
• Do not throw the battery in any liquids or place in/
near fires.
• If the battery is deformed or damaged, please stop
using immediately and replace it.
• If the continuous working time is only half of a new
battery, the battery life may be at its end. Please
replace it.
• The specified battery model and charger must be
used, otherwise there may be an explosion.
• The charging time cannot exceed 24 hours. If the
battery is out of power, please recharge in an
appropriate time and then disconnect the device.
• Please recharge the battery at least once every 6
months to avoid shortening its life.
• Replace battery every two years.
• Be sure to follow the instructions to dispose of
wasted batteries.