Identification Plate - Smeg BCC02 User Manual

Description / Assembly / Controls
DISPOSAL
Electrical appliances must not be disposed
of with household waste. The appliances
that have this symbol
the European Directive 2012/19/EU. All
discarded electric and electronic appliances
must be disposed of separately from household
waste, by taking them to relevant centres
envisioned by the Country. By disposing of
the discarded appliance correctly, damage
to the environment and risks to health will be
avoided. For further information regarding
disposal of the discarded appliance, contact
the Municipal Administration, the Disposal
dept. or the shop where the appliance was
purchased.
DESCRIPTION OF THE APPLIANCE
(Fig. A)
1
Machine body.
2
Coffee bean container lid.
3
Coffee bean container.
4
Water tank cover.
5
Water tank (1,4 l).
6
Grinding selection knob.
7
Grinders protection.
8
Brewing group access door.
9
ON/OFF button.
10 Control panel.
11 Height adjustable coffee dispenser.
12 Coffee grounds container.
13 Internal drip tray.
14 External drip tray with level indicator.
15 Brewing group.
30 Steam wand.
31 Cleaning brush.
32 Steam wand cleaning needle.
33 Water hardness test strip.
EN - 4

IDENTIFICATION PLATE

The identification plate states the technical
data, serial number, and marking.
The identification plate must never be removed.
are subject to
BEFORE FIRST USE
(Fig. A)
• Unpack the appliance carefully and remove
• Rinse the removable components with
ASSEMBLY OF COMPONENTS
(Fig. B)
• Place the machine on a flat surface and fix
• Connect the power supply cable to the
DESCRIPTION OF CONTROLS
AND ALARMS (Fig. A-C-D)
Pressing the button switches the machine on
or off.
button (20)
The product has 8 functions, accessible
through two menus, White Menu and Orange
Menu.
By pressing this button it is possible to change
the dispensing menu from "White" and
all packaging materials.
lukewarm water, such as: water tank (5)
covers (2,4), door (8) grounds container
(12) drip trays (13,14) and brewing group
(15).
B e f o r e u s e , c h e c k t h a t a l l
components are integral and have
no cracks.
the drip tray (14).
socket on the rear of the machine and the
other end to a power socket.
ON/OFF button (9)
Change dispensing program