Acqua Brevetti MiniDOS Use And Maintenance Instruction Manual page 29

MiniDOS - ENGLISH
B1.5 Hydraulic checks after installation
1) Check for correct installation to ease maintenance.
2) Check for the presence of: backflow preventer, by-pass valves, sampling taps upstream and
downstream of the equipment.
3) Check for leaks.
In case of doubt please contact Acqua Brevetti Srl (Tel. +39.(0)49.8973432, e-mail:
info@acquabrevetti.it).
B1.6 Allowed installation schemes
Install according to one of the following schemes. Follows flow direction indicated by an arrow
stamped on the back side of the water meter. Any other configuration may lead to malfunction. Do
not overtighten connections. The Manufacturer disclaims all responsability for damage caused by
installation non-compliant with the present manual. MiniDOS with DIMA connection (PM009) is
supplied disassembled. Please assemble DIMA connection before installation. The packing
includes: n°1 DIMA connection assembly, n°1 o-ring, n°2 gaskets.
CORRECT ASSEMBLY
PM008 PM009 PM008 + AV017
MAN127 E-28