Advertisement
Troubleshooting Bluetooth connections
1) Ensure the Bluetooth is properly paired using
2) Check that the antenna is installed
3) If the controller is paired and still not connecting, restart the PC with the V.Sense controller
turned off. Once the PC is turned back on, power on the V.Sense controller, and start SoilViewer
to try again.
4) Unpair any other devices which may be connected to your PC.
5) Unpair the device (figure 31 below), and repair using procedure #11 from Operations Manual.
6) Swap to USB/Serial Connection and follow troubleshooting steps listed for Troubleshooting
USB/Serial Connections, if no USB/Serial Converter connection is possible, then see step 5 of
Troubleshooting USB/Serial Connections
procedure #.
Figure 31
Figure 30
Advertisement
