1. BUTTON FUNCTIONALITY Power on Press left button Press left button Press left button to Record/Pause Switch display Press right button to switch data pages Press middle button to mark a new lap Save activity Hold right middle button for more than 2 seconds to save activity while recording Power off Hold left button more than 10 seconds...
Page 1 Speed, Gradient, Timer, Distance. Page 2 Average Speed, Average Gradient, Total Ascent, Altitude. Average Heart Rate, Average Cadence (when sensors connected). Page 3 Max Speed, Max Gradient, Calorie, Odometer. Max Heart Rate, Max Cadence (when sensors connected). Others Time of Dax, Temperature, Lap 4.
Page 5
6) Turn on your smartphone’s Bluetooth and open GPS Bike App 7) Enter the Status menu, click +, find “C210” and click it to connect. 8) When C210’s Bluetooth icon lights up it means it is connected and paired with a smartphone...
6. SETTING TIME ZONE (SETTING MODE E2) Default time zone: UTC/GMT+00:01 (Please set the local time zone) Steps: 1) Hold the right button for more than 2 seconds to enter the setting mode. 2) Select the right button to scroll settings mode from E1 to E5. 3) Select the left button to enter E2 mode when E2 is flashing.
Page 7
3) Select the left button to enter E3 mode when E3 is flashing. 4) C210 will search sensors automatically. 5) When sensors are connected, the icons will light up. 6) C210 will exit searching sensors mode in 20 seconds. Note: C210 will automatically connect the sensors that have been connected.
Page 8
Common wheel size and circumference: Wheel size L (mm) 26 x 2,125 2070 12 x 1,75 26 x 2,35 2083 14 x 1,5 1020 26 x 3,00 2170 14 x 1,5 1055 27 x 1 2145 16 x 1,5 1185 27 x 1-1/8 2155 16 x 1,5...
10. ACQUIRING SATELLTE SIGNALS AND TIME SETTINGS C210 will automatically calculate the sunrise and sunset time based on the GPS position. Backlight turns on before sunset and turns off after sunrise automatically. When the backlight is off, select any button to turn on backlight for 15 seconds.
13. FACTORY RESET Steps: 1) Power off C210. 2) Connect C210 to power adaptor by USB cable. 3) Hold the left and right button at the same time more than 5 seconds until “FA” displays on the screen. 4) Disconnect the C210 from the power adaptor.
Need help?
Do you have a question about the C210 and is the answer not in the manual?
Questions and answers