Advertisement
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
p
p
turned on.
turned on.
1.00"
[ 25.4 ]
– 3 Pole
B
– 3 Pole
A
1.73"
[ 44 ]
3.15"
[ 80 ]
[ 80 ]
807921A05
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
p
p
pp y g
pp y g
energizar el interruptor.
energizar el interruptor.
g
g
– 4 Pole
A
– 4 Pole
B
1.00"
[ 25.4 ]
.16"
[ 4 06 ]
[ 4.06 ]
"D" See Step 8
[ "D" Ver Paso 8 ]
7.05
[ 179.07 ]
Mounting Plate
[ Placa de Montaje ]
p
p
1.28"
[ 32.51 ]
3.81"
[ 96.77 ]
5.50"
[ 139.7 ]
Mounting Plate
[ Placa de Montaje ]
2.77"
[ 0 36
[ 70.36
]
4.40"
0
[ 111.76 ]
5.62"
[ 142.75 ]
5 / 9
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
p
p
q
q
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
For Mounting Three Pole Breaker.
Drill and tap four M4 X 0.7 Deep Holes
into the mounting plate.
For Mounting Four Pole Breaker.
Drill and tap six M4 X 0.7 Deep Holes
Drill and tap six M4 X 0 7 Deep Holes
into the mounting plate.
[ Para montura de interruptor de 3 polos.
Taladre y haga rosca de M4 X 0.7
A cuatro agujeros en la placa de
montaje.
Para montura de interruptor de 4 polos.
Para montura de interruptor de 4 polos.
Taladre y haga rosca de M4 X 0.7
A seis agujeros en la placa de montaje. ]
Breaker
A
[ Interruptor ]
3.00"
3 Pole
[ 3 Polos ]
[ 76.2 mm ]
4 Pole
4.00"
[ 4 Polos ]
[ 4 Polos ]
[ 101.6 mm ]
[ 101 6 mm ]
B
.85"
[ 21.59 mm ]
1.85"
[ 47 mm ]
[ 47 mm ]
Advertisement
