Advertisement
VINCO
Sliding Gate Opener
THIS SERIES OF DOOR OPENERS MUST BE INSTALLED BY
PROFESSIONALS.
1.
ATTENTION! Please operate the machine carefully in strict compliance with
instructions of this Manual. It is very important to personal safety . Incorrect
installation or improper use of the machine may cause serious damage to the person
and/or property.
2.
Read this Manual carefully before installation.
3.
The installation must comply with relevant national codes and specifications and the
mechanical parts used must meet with national standards.
4.
The power supply should have a voltage meeting the requirements of the machine,
be reliably grounded, and have both leakage protection and short circuit protection.
5.
Before system overhaul, cut off the power and check if the grounding system is
correct and reliable.
6.
The machine must be equipped with safety devices (such as infrared intrusion
protector) (optional) and should be inspected on a frequent basis for normal
operation.
7.
We will accept no responsibility for any consequences resulting from inappropriate
use of the machine or from use beyond the specified purposes.
8.
We will accept no responsibility for any problem incurred due to neglect of the
process requirements of precision components or due to deformation of such
components during the installation.
9.
The product was designed and manufactured in strict compliance with the operating
instructions given in this Manual. Any use or operation against these instructions
may damage the product or bring a hazard.
10. We will accept no responsibility for any safety problem or operation failure caused by
the use of any component not produced by us.
11. Don't make any change to the components of the system.
12. The installer must explain in detail to the user the operating rules of the machine and
relevant regulations in case of an emergency, and provide the user with the Manual.
13. Keep children and other unauthorized persons away from the installation site and
make sure there is no risk factor existing in the vicinity of the installation site.
14. Clean off any obstacle from the motion route of the door before the electric control
system is put into operation, and stop the flow of vehicles and pedestrians when the
door is in motion.
15. The main control box should be installed in such a position and to such a height that
should be appropriate, ventilated, and properly protected from rain, sunshine,
playing kids, and the operation of remote control and control panel switch by
mistake.
16. An external housing may be added if necessary. In doing so, the shielding effect of
the external housing (usually made of metal) against the receiving of remote control
signals should be taken into account since it may affect the product's functionality
and bring inconvenience to the user.
17. Keep the remote control out of the reach of children. Failure to do so may incur
accident to children.
18. Don't try to repair or adjust the system by yourself. Contact professionals instead.
19. Keep the Manual properly for future use.
2
R
Safety Protection and Precautions
Advertisement
