Care And Cleaning; Troubleshooting - AEG HE604060XB User Manual

20 www.aeg.com

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.
7.1 General information
• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the
surface have no effect on how the hob
operates.
• Use a special cleaner applicable for
the surface of the hob.
• Use a special scraper for the glass.
7.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar.

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
You cannot activate or oper‐
ate the hob.
Residual heat indicator does
not come on.
There is a dark area
on the multiple zone.
You cannot activate or deac‐
tivate the outer ring.
If not, the dirt can cause damage to
the hob. Take care to avoid burns. Put
the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a moist cloth.
Possible cause
The fuse is blown.
The zone is not hot because
it operated only for a short
time or the sensor is dam‐
aged.
It is normal that there is a
dark area on the multiple
zone.
Electronics may be dam‐
aged.
Remedy
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali‐
fied electrician.
If the zone operated suffi‐
ciently long to be hot, speak
to an Authorised Service
Centre.
Call an Authorised Service
Centre. Do not use the
zones until they are re‐
paired.