Blodgett SB-10E Specifications

SB-E
Convection Steamer on Electric Boiler Base
SB-6E shown
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Voltage Options
480 VAC, 3 phase, 60 hz
240/415 VAC, 3 phase, 4 wire
220/380 VAC, 3 phase, 4 wire
600 VAC, 3 phase, 60 hz
Increased Rating Options
42 kW for SB-6E & SB-10E
48 kW for SB-6E, SB-10E and SB-16E
36" (914 mm) wide boiler base for SB-6E & SB10E
Stainless steel frame
Stainless steel rear panel
Correctional package
Steam take off kit
Water in "Y" strainer
Spray and rinse assembly
Load compensation timer
One year extended warranty
CAPACITY
Model SB-6E is two 3 pan steamer compartments
Model SB-10E is two 5 pan steamer compartments
Model SB-16E is two 8 pan steamer compartments
Project
Item No.
Quantity
Model SB-6E (6 pan convection steamer on a 24" electric boiler base)
Model SB-10E (10 pan convection steamer on a 24" electric boiler base)
Model SB-16E (16 pan convection steamer on a 36" electric boiler base)
STEAMER CONSTRUCTION
304 satin finish stainless steel
Welded stainless steel door with removable inner stainless steel liner
Full perimeter door gasket
Positive lock and seal mechanism with spring release on door
Stainless steel control housing
One piece welded 316 stainless steel cooking chamber
Coved corners
Stainless steel pan supports
Stainless steel drip trough integrally connected to drain
STEAMER OPERATION
Separate controls for each compartment
Controls accessible through removable side panel
Illuminated on/off power switch
Ready and Cooking indicator lights
60 minute electric timer with audible alarm to signal end of cook cycle
Steam flow to the cooking chamber is cut off when the door is opened
during the cooking cycle and reactivated when the door is closed
BOILER BASE CONSTRUCTION
Full perimeter painted angle iron frame
Reinforced steamer and boiler mountings
Stainless steel exterior
Hinged door(s) with magnetic latch
6" (152 mm) stainless steel legs with adjustable bullet feet on front and
adjustable flanged feet on rear for securing unit to floor
BOILER BASE OPERATION
Automatic water level control
Automatic boiler blowdown
Pressure and Water gauges
Pressure control with pressure safety control
Safety relief valve
Cathodic protector
CSD-1 secondary low water cut off
STANDARD FEATURES
208, 240 VAC, 3 phase, 60 hz for boiler
Electromechanical controls
Split water lines
Startup inspection service by factory autorized service agent
One year parts and labor steamer warranty*
Five year limited steamer door warranty*
* For all international markets, contact your local distributor
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
BLODGETT
www.blodgett.com