Smart Remote - GoPro SMART REMOTE User Manual

Capturing Video and Photos
Use the remote to capture video and photos with one camera or
multiple cameras.
TO CAPTURE VIDEO OR PHOTOS
1. Press the Power/Mode button
that you want.
2. Press the Shutter/Select button to start capturing.
3. To stop capturing video or time lapse content, press the Shutter/Select
button again.
If your camera goes out of range of the remote while you are recording,
recording will continue until you stop it.
CHANGING PRESETS (HERO8 BLACK)
1. Press the Settings button to see all the presets for the selected mode.
2. Press the Power/Mode button
3. Press the Shutter/Select button to select the preset that you want.
PRO TIP: Mark favorite moments by pressing the Power/Mode button
the remote during recording or playback. This adds a HiLight Tag that makes
those moments easier to find later.
THE FOLLOWING FEATURES ARE NOT AVAILABLE WHEN USING THE
REMOTE WITH YOUR GOPRO
• QuikCapture
• Continuous photo with multiple cameras
• Manual capture of photos while recording video with multiple cameras
Regulatory Information
To see additional information regarding country certifications, refer to the
Important Product + Safety Instructions included with your remote.
repeatedly to cycle to the mode
repeatedly to cycle through the presets.
SMART REMOTE
TÉLÉCOMMANDE LONGUE PORTÉE POUR VOTRE GOPRO
MANUEL DE L'UTILISATEUR
on