Dubbing To Other Devices - Sony HXR-MC1 Operating Guide Operating Manual

Dubbing to other devices

Connecting with the A/V connecting cable
You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 9). Refer also to the instruction manuals supplied with the devices to be
connected.
b Notes
• Movies recorded with HD (high definition) image quality will be dubbed with SD (standard
definition) image quality.
• To copy a movie recorded with HD (high definition) image quality, install the application software
(supplied) on your computer, and copy the images to a disc in the computer.
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
Devices with an S VIDEO jack
: Video/Signal flow
A A/V connecting cable (supplied)
Connect to input jacks of other devices.
IN
(White)
S VIDEO
VIDEO
(Yellow)
IN
(Red) (Yellow)
AUDIO VIDEO
VCRs or DVD/
HDD recorders
B A/V connecting cable with S
VIDEO (sold separately)
When connecting to another device via
the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (sold separately), higher quality
images can be produced than with an A/
V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable (sold separately). The yellow plug
connection is not necessary. S VIDEO
connection only will not output audio.
(White) (Red)
AUDIO
Devices without an
S VIDEO jack
39