Getting Started Watching Your Tv - Acer AT4250DTV Service Manual

Getting Started Watching Your TV

# Item
1 Power
2 Setup Wizard
3 Changing channels
4 Adjusting the volume
Note: Setup may vary due to local broadcast differences.
10
Description
a. Turn on the power switch beneath the screen.
b. Press the power button, number keys or channel up/
down button on the remote control.
The first time you switch on the TV, the Setup Wizard will
guide you to complete the language selection and
channel scanning. Press OK key to begin the setup
process.
a. Select the setup language your prefer.
b. Please select country.
c. Enter the correct time zone using the remote control.
d. Enable or disable daylight saving time.
e. Ensure that your co-axial cables are connected
correctly before proceeding.
f. Scan for digital channels.
g. Scan for analog channels.
h. Setup is now complete. You are ready to begin
watching TV.
You can also adjust these settings using the front control
panel. Please see Front Panel View,
a. Press 0-9 on the remote control to select a channel.
The channel changes after 2 seconds. Press ENTER to
select the select the channel immediately.
b. Pressing the channel (CH) up/down button on the
remote control will also change the channel.
Adjust the volume level using the (VOL) up/down button
on the remote control.
Chapter 1