Connecting a PC or Notebook Computer
To display PC output on your TV, please connect your PC or notebook computer to the TV as shown below.
Note: For VGA input, Acer recommends setting your PC's external monitor resolution to 1920 x 1080 pixels at
30Hz refresh rate.
Selecting the Input Source
Once you have connected your antenna or external equipment to the TV, you need to select the correct input
source. Press the corresponding button on the remote control to select the correct input source.
#
Item
1
TV key
2
AV key
3
SCART key
Chapter 1
Input Button Guide
Toggle Analog TV (ATV) and Digital TV (DTV) between
input sources.
Toggle AV3, AV4, HDMI1 and HDMI2 between input
sources.
Toggle SCART1 and SCART2 between input sources.
13