Getting Started Watching Your Tv; Power On; Adjusting The Volume; Scanning The Channels - Acer AL2671W User Manual

Getting started watching your TV

Power On

a. Turn on power switch on bottom of TV.
b. Press the power button on remote control
a
�
�
Changing channels
1 Press 0-9 on the remote control to select a
channel. The channel changes after 2 seconds.
Press ENTER to select the channel immediately.
� � �
� � �
� � �
�
�����
������
2 You can also change the channels by pressing
and holding the Channel Up/Down button
on the remote control. Up will increase the
number, while down will decrease the number.
��

Adjusting the volume

Adjust the volume using the VOL +/- button on the
remote control. Up will increase the volume, while
down will decrease the volume.
���
You can also adjust these settings using
the front control panel. Please see "Front
panel view" on page 8 for details.
b
�����

Scanning the channels

The first time you use your TV, use the following
method: Menu -> Settings -> Channel settings ->
Scan -> "YES". The TV will auto-detect available
channels and store them in memory.
The first time you access the OSD, a lan-
guage setting subwindow will pop up,
and you will be asked to choose your lan-
guage settings.
15