Zamel EXTA ASM-03 Instruction Manual

STAIRCASE LIGHTING TIMER ASM-03
DESCRIPTION
Staircase lighting timer ASM-03 is
used for staircase and hall lightning
controlling. After a signal it switches on
the lightning for a set time and then au-
tomatically switches off. Working can be
smoothly regulated from 3 to 30 min by
potentionometer placed on front panel of
the automat. ASM-03 is equipped with
con-blockade function and ON/OFF
function.
FEATURES
● Staircase lighting control
● Fluent operating time adjustment
from 3 to 30 minutes
● Relay indicator: LED red
● Input rated indicator : LED green
● Mode setting option: continuous work
mode (ON), or continuous work mode
OFF
● Cooperation with unipolar illuminated
pushbuttons
● Con-blockade function
● Voltage relay output – one joint of
max 16 A load
● Monomodular casing
● Mounting on TH 35 rail
The device is designed for
one-phase installation and
must be installed in accor-
dance with standards valid
in a particular country. The
device should be connected
CAUTION
according to the details inclu-
ded in this instruction manual. Installation, con-
nection and control should be carried out by a
qualified electrician staff, who act in accordan-
ce with the instruction manual and the device
functions. Disassembling of the device is equal
with a loss of guarantee and can cause elec-
tric shock. Before installation make sure the
connection cables are not under voltage. The
cruciform head screwdriver 3,5 mm should be
used to install the device. Improper transport,
storage, and use of the device influence its
wrong functioning. It is not advisable to install
the device in the following cases: if any device's
part is missing or the device is damaged or de-
formed. In case of improper functioning of the
device contact the producer.
The symbol stands for selective
collection of electrical and
electronic devices. Placing used
devices with other waste is not
allowed
ZAMEL Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com, e-mail: marketing@zamel.pl
TECHNICAL DATA
Input (supply) terminals: L, N
Input rated voltage: 230 V AC
Input voltage tolerance: -15 ÷ +10 %
Power/relay supply indicator: green LED
Nominal frequency: 50 / 60 Hz
Rated power consumption: 25 mA
Supply/release terminals: IN, IN, IN
Supply/release control current: 300 µA
Threshold adjustment time: 3 min ÷ 30 min (rotating potentionometer)
Operation mode: ON, AUTO, OFF
Time accuracy adjustment: ±10 %
Time repeatability adjustment: ±5 %
Relay indicator: LED red
Output contacts parameters: 1NO - 16 A / 250 V AC1 4000 VA
Number of terminal clamps: 8
Section of connecting cables: 0,2 ÷ 2,50 mm
Ambient temperature range: -20 ÷ +45
Operating position: free
Casing protection degree: IP20 (EN 60529)
Protection level: II
Overvoltage category: II
Pollution degree: 2
Reference standards: EN 60669-1; EN 60669-2-1
APPEARANCE
Input terminal (L)
Input rated signalization
O u t p u t r e l a y
terminals (11,11,14)
ASM-03
2
C
o
Mounting: TH rail 35 (EN 60715)
Surge voltage: 2 kV (EN 60669-1), 1 kV (EN 61000-4-5)
Dimensions: monomodular (17,5 mm) 90x17,5x66 mm
Weight: 76 g
EN 61000-4-2,3,4,5,6,11
INSTRUCTION MANUAL
Input terminal (N)
Output terminals (IN,IN,IN)
Relay indicator signalization
ON/AUTO/OFF function
VER. 001_03.04.2012