Macnaught K32 Instruction Manual

KF145
0206
0005
INTRODUCTION
Thank you for purchasing a Macnaught K32 single hand
operated grease gun.
Please read and retain this instruction sheet to assist you
in the operation and maintenance of this quality product.
DESCRIPTION
Your Macnaught Flexigun is a pistol grip type grease gun
complete with high pressure flexible grease hose for easy
access to those hard to reach grease points.
It is designed for use with 400g cartridges or bulk grease.
The filler/bleeder valve in the head also allows clean filling
from 20kg (35lb) grease pails using a Macnaught "J2" Grease
Gun Filler Pump.
The "variable stroke" feature of this grease gun allows you to
achieve higher greasing pressures using short piston strokes
or high volume with a full stroke.
CAUTION
Caution must be observed when either unscrewing the
barrel or unscrewing the pull handle from the follower rod,
the large follower spring inside the barrel is energised.
IMPORTANT
To select the correct follower position for bulk fill or cartridge
1. Loading Gun with Grease
If Using Cartridge Grease:
A) Unscrew Barrel and "Lock" Follower (see Fig 4).
K32 FLEXIGUN
INSTRUCTION MANUAL
B) Pull Follower Rod out until groove in rod can be moved
C) Remove both caps from grease cartridge. Insert into
D) Bleed air from grease (see Fig 5).
If Using Bulk Grease:
Select the correct follower position (see Fig 1):
A)
B) Insert Barrel into grease and slowly pull Follower Rod
Fig 1
C) When groove in rod lines up with slot in end cap, lock rod
K32 FLEXIGUN
into slot in Barrel End Cap, lock the rod into end cap.
Barrel, larger open end first. Screw barrel to head tightly.
Unscrew Barrel and lock Follower (see Fig 4).
out while pushing Barrel further into grease (see Fig 2)..
Fig 2
in end cap.
Fig 3
1