Related Manuals for Silver Cross Classic Chassis
Summary of Contents for Silver Cross Classic Chassis
- Page 1 Classic Chassis Instructions Important: Keep for future referenCe Please read these instructions carefully before using your new pram Keep them in a safe place so that you may use them in the future...
-
Page 2: Table Of Contents
Opening the chassis ......... .11 Using your Classic chassis with the Ventura car seat ....12... -
Page 3: Preparation For Use
1. preparatIon for use First check that all your parts have been supplied. Your complete chassis includes: a. Chassis C. Wheels x 4 B. Basket x 1 Providing everything is present you are ready to continue. Open the chassis by sliding the folding catches (e) towards you. - Page 4 1. preparatIon for use (Cont.) Your Classic chassis has a multi-position adjustable handle. Press both adjuster buttons and rotate the handle to the mid-position.Release buttons to lock Now attach your wheels by first removing any axle packing protection. Present the wheels to the axle and slide into position.
- Page 5 1. preparatIon for use (Cont.) Your Classic chassis is fitted with hard wearing EVA tyres for convenience and a puncture free ride. Your Classic chassis is now ready for use. We will now proceed to the features and folding of your Classic chassis...
-
Page 6: Using The Brake
header 2. usIng the BraKe To engage the brake simply press down on the brake pedal where is marked. Always check your brake is fully engaged by gently rocking your chassis. To disengage the brake simply press on the pedal in the position. -
Page 7: Height Adjustable Handle
header 3. heIght aDjustaBle hanDle The handle is fully adjustable to accommodate users of varying heights giving added comfort and allowing for compact storage To adjust the handle simply press both the adjuster buttons and rotate to the desired height. Release buttons to lock. Your handle has various different positions and should always lock firmly into place. -
Page 8: Folding The Chassis
header 4. folDIng the ChassIs Slide the folding catches (e) towards you until the locking catches disengage on both sides. note: The secondary safety catch will lock at this stage. To disengage the secondary safety lock (g), slightly press down on the handle allowing the secondary lock (g) to swing freely. - Page 9 4. folDIng the ChassIs (Cont.) Your Classic chassis has an automatic locking catch which secures your chassis for easy transportation and storage For the most compact fold, adjust the handle and rotate it towards the floor, then lock. The wheels are removable by lifting the...
-
Page 10: Opening The Chassis
header 5. openIng the ChassIs Slide the folding catches (e) towards you to release the automatic chassis lock Lift the handle and rotate into the locked position. Press firmly to ensure both locks engage Adjust your handle to the desired height position. -
Page 11: Using Your Classic Chassis With The Ventura Car Seat
6. usIng Your ClassIC wIth the ventura Car seat To attach your Ventura car seat to the Classic chassis, hold the car seat centrally over the chassis mounting bars. On the underneath of the Ventura are four locking points, lower the car seat onto the Classic mounting bars so that these locate and ‘click’. -
Page 12: Safety Notes
Read the “ To fold or unfold” instructions carefully. It may be unsafe to fit accessories or spare parts other than those supplied or recommended by Silver Cross. If anyone other than the owner is going to use the pushchair (e.g. grandparent, child minder), please show them how to use it correctly. - Page 13 Filling material(s) and covering fabric(s) meet the requirements for resistance to cigarette and match ignition in the 1988 safety regulations. CARELESSNESS CAUSES FIRE Silver Cross (UK) Ltd Micklethorn Broughton Skipton North Yorkshire BD23 3JA Telephone: 01756 702412 Website: www.silvercross.co.uk...
Need help?
Do you have a question about the Classic Chassis and is the answer not in the manual?
Questions and answers