Table of Contents
Advertisement
23.
NEEDLE THREADER (EXCHANGE)
HOW TO REPLACE NEEDLE THREADER
1.
Remove the needle and lower the presser foot lifter.
2.
Lower the needle threader lever as far as possible. With the hook rotated, push down on the needle
threader device to remove it. (Push down on the portion of the thread guide assembly shaded in the
illustration.)
3.
Place the new device so that groove S and groove T of the hook assembly and thread guide assembly are
aligned with pin A, as shown in the illustration.
4.
Push the needle threader device up until pin A is inserted in the grooves. (Be careful that pin B is inserted
into the groove in part C.
www.promelectroavtomat.ru
-53-
Advertisement
Chapters
Table of Contents
