2.
SETTING THE TEST MODE
BASIC TEST MODES
To set the test mode, turn on the power switch while holding down the start/stop button and backtack button
simultaneously. Numerals will appear on the touch panel. The respective test mode will be entered when the
numeral is pressed.
NO
Test Name
NO01 Serial number of machine on
display
NO02 Fabric thickness setting
NO03 Pattern adjustment
NO04 3-point needle drop
NO05 Needle clearance
NO06 Feed dog position
Contents
Displays the serial number of the
machine
Refer to 40
Refer to 48
Refer to 32
Refer to 34
Refer to 37
www.promelectroavtomat.ru
Notes
-26-