Needle Threader - promelectroavtomat ULT2003D Service Manual

Computerized sewing machine
Table of Contents

Advertisement

21.

NEEDLE THREADER

USING THE NEEDLE THREADER
There are a wide variety of different needles and sewing machine threads available. The right ones should be
selected in accordance with the sewing conditions. The accessory needle threader is designed to make threading
of needles easier, but it cannot handle every single circumstance of use (combinations of needle and thread) that
may occur. It can be used with some combinations but not with others, and if it can be used, the pattern may not
be sewn correctly due to the particular sewing conditions. Do not use the needle threader without gaining a
thorough understanding of how to use it, otherwise the needle threader may be damaged or needle threading
may not be possible. Be sure to read and understand the following so that you can handle customer complaints.
NOTE :
1. Needle threader accepts only circled needle and thread combinations.
2. Combinations marked with a * are not recommended since they might lead to the breakage of needle
threader performance.
3. Lower the presser foot when you use needle threader.
4. Nylon transparent thread is applicable in needle #14-16.
5. Do not turn the balance wheel when using needle threader.
6. Do not lower the needle threader lever while the machine is running. If it is lowered, the needle threader
may be broken, rendering it unusable. Besides this, it may cause the needle to break, which could result
in injury.
7. If a #9 needle is used, the variation in needle precision may result in the needle being slightly difficult to
thread.
8. Needle should be located above needle plate by more than 8 mm for threading.
9. Needle threader does not work when you use the side-cutter.
Thread the needle before attaching the side cutter.
10. When doing embroidery, use a #11 needle. Use special weight #50 embroidery thread and #50-#80 silk
thread for the embroidery thread.
Thread
Needle
#9
#11
#14
#16
#18
#30
#50
×
×
×
O
×
O
O
www.promelectroavtomat.ru
#60
#80
×
O
O
O
O
O
O
-51-
#100
#120
O
O
O

Advertisement

Table of Contents
loading

This manual is also suitable for:

Super galaxie 3100dUlt2001nUlt2001cM3000nM3000c

Table of Contents