Safety Regulations - Pilz PMI v315 ATEX Operating Manual

Safety
The installation of the following software has been tested:
• zenOn from COPA-DATA
• Web Studio from InduSoft
• Movicon from Progea
With PMI v315 ATEX, the process can be visualised by means of screens
which are directly edited by the user, and it can also be controlled via
various available functions. The software used to provide the link to the
technical process is described in the "PMI-PRO (open) driver description"
documentation.
CAUTION!
The unit is not designed for use in applications with high safety
requirements (e.g. E-STOP).
The unit is designed to be installed within an electromagnetic industrial
environment. To ensure electromagnetic compatibility the correct
procedures must be carried out when installing the unit. Intended use
includes complying with the technical details stated at the end of this
operating manual. Any component, technical or electrical modifications
carried out will be deemed as improper use.

Safety regulations

Failure to keep to these safety regulations will render all warranty and
liability claims invalid.
Additionally, all rules and regulations for accident prevention for the
particular area of application must be met. In particular, VDE, ATEX and all
local regulations regarding safety measures should also be taken into
account.
Use of qualified operating personnel
It is the company's responsibility only to employ personnel who:
• Are familiar with ATEX regulations
• Are familiar with the basic regulations concerning health and safety /
accident prevention
3 - 2 Operating Manual: PMI v315 ATEX/PMI o315 ATEX