Decoding Using Fixed Code - Blaupunkt IDC-A09 Operating And Installation Manual

DECODING
Example 1234:
a) Press the button once.
b) Press the >> button once.
c) Press the button twice.
d) Press the >> button once.
e) Press the button three times.
f) Press the >> button once.
g) Press the button four times.
7. Once you have correctly entered the
entire code, confirm your entry by
pressing the ENT button.
The red LEDs for all the eject buttons
begin to light up.
Switch off the radio (do not switch it
on again).
The IDC A09's code is now deactivated.
You may now remove the IDC A09.
Decoding using a car radio that
has a fixed code
The master code is printed on your IDC
A09 pass card.
1. Switch on the radio.
2. Press the CDC button.
3. Press the IDC A09's eject buttons
2+5 simultaneously, keep them
pressed for at least 1 second and
then release them.
The IDC A09 stops playing.
The red LEDs for all the eject buttons
begin to light up.
18
(BEFORE RE MOVAL)
4. Switch off the radio.
5. Switch on the radio again.
The following appears briefly in the
display:
" CDC CODE "
The display then changes to:
" 0000 "
6. You can enter the master code by
pressing the station buttons 1-4.
Example 4321:
a) Press station button 1 four times.
b) Press station button 2 three times.
c) Press station button 3 twice.
d) Press station button 4 once.
7. Once you have correctly entered the
complete numerical code, there are
two possible ways of confirming your
entry:
a) on car radios that have an "OK but-
ton", confirm your entry by pressing
this button,
b) on car radios that do not have an
"OK button", confirm your entry by
pressing the search button " ".
The red LEDs for all the eject buttons
begin to light up.
Switch off the radio (do not switch it
on again).
The IDC A09's code is now deactivated.
You may now remove the IDC A09.