Preparing Booster Seat For Use - Safety 1st Pronto Instructions Manual

Preparing Booster Seat for Use

5
Remove the headrest from the backrest in order to install the
headrest and backrest pads.
Removing Headrest from Backrest
1
2
Unlock Headrest from
Backrest
With the headrest and backrest
facing down, lift headrest adjuster
lock up and pull headrest up out
of all locked positions.
Separate Headrest from
Backrest
Slide the headrest out of the track
on the backrest.
If your pad comes in a plastic bag, remove the pad from the plastic
bag and discard the plastic bag.
Installing Seat Pad
1 Install Seat Pad
Slide seat pad onto the front of
the seat base.
Slide the elastic strap over
each armrest.
2
Wrap Elastic Straps
Under Back Corners of
Seat Base
3
Pull Seat Pad Around Cup
Holder
6
continued on next page