Table of Contents
Advertisement
Quick Links
Before installing the PH Series Proportioner and start-up, carefully
read all the technical and safety documentation included in this
manual. Pay special attention to the information in order to know and
understand the operation and the conditions of use of the PH Series
Proportioner. All of the information is aimed at improving user safety
and avoiding possible breakdowns from the incorrect use of the PH
Series Proportioner.
PH(X)-55
Proportioner
CUSTOM MACHINE
Hydraulic, Heated, Plural Component
Proportioner
For spraying Polyurethane Foam and
Coatings
For Professional Use Only
Not approved for use in explosive
atmosphere locations
Addendum to
PH(X)-25/PH(X)-40
Service Manual
Ref. # MN-04020
Revision 2.1
August 6, 2021
Polyurethane Machinery Corp.
Corporate: 1 Komo Dr, Lakewood, NJ 08701
Manufacturing: 2 Komo Dr, Lakewood, NJ 08701
Phone: 732-415-4400
Fax: 732-364-4025
URL:
http://www.polymac-usa.com
Advertisement
Table of Contents
Related Manuals for PMC PH-55
Summary of Contents for PMC PH-55
- Page 1 PH(X)-55 Proportioner CUSTOM MACHINE Hydraulic, Heated, Plural Component Proportioner For spraying Polyurethane Foam and Coatings For Professional Use Only Not approved for use in explosive atmosphere locations Addendum to PH(X)-25/PH(X)-40 Service Manual Ref. # MN-04020 Revision 2.1 August 6, 2021 Polyurethane Machinery Corp.
-
Page 2: Table Of Contents
ELECTRICAL ........................5 MECHANICAL ........................5 REPLACEMENT KITS ......................6 PART IDENTIFICATION ......................8 PH(X)-55 ..........................8 PUMP LINE ASSEMBLY (PH-55 ONLY) ................9 PUMP LINE ASSEMBLY (PHX-55 ONLY) ................. 10 MOTOR LINE ASSEMBLY ....................11 FRAME ASSEMBLY ......................12... -
Page 3: Warranty
Defective in material or workmanship, it is Customer’s responsibility to contact PMC and return the Product to PMC as directed by PMC, freight prepaid. If PMC determines that the Product is Defective and that such Defect is covered by this Warranty, PMC will credit Customer for the reasonable freight charges incurred by Customer in returning the Defective Product to PMC, and PMC (or its authorized agent) will, at PMC’s option, repair or replace the Product, subject to... - Page 4 No Rights Implied: Nothing in the sale, lease or rental of any Product by PMC shall be construed to grant any right, interest or license in or under any patent, trademark, copyright, trade secret or other proprietary right or material owned by anyone;...
-
Page 5: Safety And Handling
Keep this document for future consultation of useful information at all times. If you lose this manual, ask for a new copy from your PMC Distributor or go online and visit our web site at www.polymac-usa.com. - Page 6 Always use liquids and solvents that are compatible with the unit. If in doubt, consult your PMC Distributor. When working with the PH Series Proportioner, it is recommended that the operator wear suitable clothing and elements of personal protection, including, without limitation, gloves, protective goggles, safety footwear, and face masks.
-
Page 7: Technical Specifications
Maximum working pressure (PH-55): ________________________ 2,500 psi (172 bar) Maximum working pressure (PHX-55): _______________________ 3,500 psi (241 bar) Maximum production ratio 1:1 (PH-55): ____________________ 55 lbs/min (25 kg/min) Maximum production ratio 1:1 (PHX-55): _____________________ 3.5 GPM (13 LPM) Minimum production (PH-55): __________________________________ 2 lb/min (1 kg) -
Page 8: Replacement Kits
REPLACEMENT KITS Refer to PH(X)- 40 manual for all other replacement kits 120HV A PUMP REBUILD KIT* (PH-55 ONLY) KT-07008 PART NUMBER QTY DESCRIPTION PU-03000 Triple Lip Seal, 120 Pump PU-03015 Retaining Ring, 120HV, A PU-03018 Shaft Bearing, 120HV, A PU-01016A-012 Piston Seal;... - Page 9 REPLACEMENT KITS PART NUMBER DESCRIPTION 200706 CHECK VALVE REMOVAL TOOL, PUMP HI-05067 PIPE PLUH 1/4-18 ; 7/8 TAPER OR-00045A O-RING #028 VITON 90D OR-00051B O-RING #218 AFLAS 80D PR-01003-DG INLET BALL SEAT GASKET PU-01003-IG DISCHARGE BALL SEAT GAASKET PU-05019 SEAT, INLET PU-05020 BALL, INLET PU-05021...
-
Page 10: Part Identification
PART IDENTIFICATION PART IDENTIFICATION PH(X)-55 PH(X)-55 ITEM QTY PART NUMBER DESCRIPTION PL-55 PUMP LINE ASSEMBLY, PH-55 200500 PUMP LINE ASSEMBLY, PHX-55 200181 CONSOLE MOUNTING BRACKET, PH(X)-55 ML-55 MOTOR LINE ASY; 7.5HP, 3PH, 60HZ FR-55-1 FRAME/TANK ASSEMBLY, PH(X)-55 200509 TEMPERATURE CONTROLLER, PH(X)-55... -
Page 11: Pump Line Assembly (Ph-55 Only)
PUMP LINE ASSEMBLY (PL-55) ITEM QTY PART NUMBER DESCRIPTION 201167 E-CLIP, 7/32 202169 HYDRAULIC CYLINDER COMPLETE 202666 “A” PUMP ASSY, SIZE 120, PH-55 PU-01027 ACTIVATOR PLATE COVER PU-01027 (O-RING) -011 O-RING PU-01027 (BOLT) BHCS, 5/16-18 X 1/2 PU-05002-120 “R” PUMP ASSY, SIZE 120... -
Page 12: Pump Line Assembly (Phx-55 Only)
PUMP LINE ASSEMBLY (PHX-55 ONLY) (200500) PART LIST ITEM QTY PART NUMBER DESCRIPTION 200194 DIRECTIONAL VALVE, PH-55 200184 HV HYDRAULIC MANIFOLD, PH-55 200195 O-RING, 114, VITON HI-05033 3/4-16 O-RING PLUG PU-05001-80 "A" PUMP ASSY, SIZE 80 PU-05002-80 "R" PUMP ASSY, SIZE 80... -
Page 13: Motor Line Assembly
PART IDENTIFICATION MOTOR LINE ASSEMBLY (ML-55) MOTOR LINE ASSEMBLY (ML-55) ITEM QTY PART NUMBER DESCRIPTION 200185 7.5 WEG MOTOR, PH(X)-55 200188 BELL HOUSING, 2-BOLT, PH(X)-55 200192 28CC PUMP, PH(X)-55 200187 1-1/4” NPT FLANGE 200189 MAGNALOY HUB, PH(X)-55 200191 COUPLING INSERT, 3/4” BORE 200190 MAGNALOY COUPLING, 7/8 X 1/5 200193... -
Page 14: Frame Assembly
PART IDENTIFICATION FRAME ASSEMBLY (FR-55-1) FR-55-1 ITEM QTY PART NUMBER DESCRIPTION 200180 TANK LID, PH(X)-55 200186 GROMMET MODIFIED 1-5/8” 200183-4 HV MOTOR BRACKET, PH(X)-55...