Altitude Hold Mode - Honeywell BENDIXKing xCruze 110 Operating Handbook

6.4.2. Altitude Hold Mode

The altitude hold mode holds the selected altitude. The autopilot
can hold at any 100-foot increment. When directly entering the ALT
HOLD mode, the autopilot will go to the nearest 100-foot increment.
Always be sure you've synced the altimeter before using the altitude
hold mode.
This mode is accessed from the track select mode, GPS Nav
mode, GPSS mode, and SVS mode by toggling the joystick to the right
one time and then pressing the knob. Toggling the joystick once
brings up the altitude select setup screen but pressing the knob once
selects the current altitude, which puts the autopilot into altitude
hold mode. The transition from SVS to ALT HOLD mode is shown in
figure 6.4.2a.
8300-089
Toggle joystick to the right
Press knob
38 Rev 3