Gps Nav Mode (Rs232 Only) - Honeywell BENDIXKing xCruze 110 Operating Handbook

6.3.2. GPS NAV Mode (RS232 Only)

The GPS Nav mode allows the autopilot to follow a direct-to or
multi-leg flight plan from the connected handheld, non-IFR GPS, or
IFR GPS without ARINC 429 connection. This mode uses only RS232
data and will not anticipate any turns or fly any procedure
turns/approaches. This mode is accessed from the track select mode
by toggling the joystick to the left.
To access the GPS Nav mode from track select mode, toggle the
joystick to the left. Figure 6.3.2a shows the transition from track
select mode to GPS Nav mode.
8300-089
Toggle joystick to the left
Figure 6.3.2a
34 Rev 3