Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your own preferences.
Display
Function
Automatic childproof lock
™‚
Switched off.*
‹
Switched on.
‚
™ƒ
Audible signal
‹
Confirmation signal and operation error signal are switched off.
Only the operation error signal is switched on.
‚
ƒ
Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched on.*
„
Automatic timer
™†
Switched off.*
‹
‚
-
ŠŠ
Cooking time, after which the hotplates switch off
Duration of the timer end signal
™‡
‚
10 seconds.*
30 seconds
ƒ n
„
1 minute.
Activation of the filament circuits
™ˆ
‹
Switched off.
Switched on.
‚
ƒ
Last setting before the hotplate was switched off.*
Reset to basic setting
™‹
‹
Switched off.*
Switched on.
‚
* Basic setting
Changing the basic settings
The hob must be switched off.
Switch on the front left hotplate at heat setting 1.
1.
Within the next 10 seconds, press and hold the
2.
for 4 seconds
and
flash alternately in the left-hand display;
™
‚
the right-hand display.
and the
/
residual heat
" ‰
•
œ
D
lights up in
‹
Switch off the hotplate.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note: You can switch the hotplate back on again at any time.
Touch the
3.
appears in the left-hand display.
Touch the + or - symbol repeatedly until the desired setting
4.
appears in the display.
symbol
Touch and hold the
5.
The setting is activated.
Switch off the hotplate.
6.
D
symbol repeatedly until the desired indicator
symbol for 4 seconds.
D
9