Pioneer DV-588A-s Operating Instructions Manual page 51

Progressive
_Mid.book Page 51 Monday, April 18, 2005 8:54 PM
scan video
Regions
(DVD-Video
only)
Sampling
frequency
Remedy
WMA
ay, April 18, 2005 8:54 PM
play multi- • Make sure that Audio Output Mode is set to 5.1 Channel
audio
(page 41).
• Check that the Dolby Digital, DTS and MPEG Out settings
(pages 35–36) are suitable for your amplifier/receiver—check the
instruction manual that came with your amplifier/receiver.
• DVD-Audio and SACDs do not output multichannel digital audio.
Listen through the player's analog outputs.
• Check that the settings in the Speaker Installation screen are
correct (page 44).
Super Audio
CD (SACD) • Check the audio options available from the disc menu.
listen to high- • Make sure that Linear PCM Out is set to Downsample Off
g rate audio
(page 36).
M
ken for trouble or malfunction. If you think that there is
the digital
• As a copy-protection measure, some DVDs do not output 96kHz
nent, check the points below. Sometimes the trouble may lie in
audio. In this case, even if set to Downsample Off , the player
ther components and electrical appliances being used. If the
automatically outputs the audio at 48 kHz. This is not a malfunction.
*1
Manufactured under license from Dolby
hecking the items below, ask your nearest Pioneer authorized
Laboratories. ÒDolbyÓ and the double-D symbol
output 192kHz or
• The player does not output digital audio at these sampling rates. The
rry out repair work.
are trademarks of Dolby Laboratories.
z digital audio.
digital output is automatically downsampled.
dy
*2
output 96kHz or • Check that Linear PCM Out is set to Downsample Off (page 36).
ÒDTSÓ and ÒDTS Digital SurroundÓ are
digital audio. • Some discs are digital copy protected and do not output high
registered trademarks of Digital Theater
ke sure the disc is free from dirt and dust and is not damaged
sampling rate digital audio. In this case the output is automatically
Systems, Inc.
45).
downsampled.
e sure the disc is loaded with the label side face-up and aligned
rly in the disc tray guide.
audio output.
• If this unit is connected to a non-DTS compatible amplifier or
cting languages using the
ompatible region number: If the region number on a DVD-Video
08 decoder using a digital audio cable, set DTS Out to DTS
oes not match the number on the player, the disc cannot be
uage code list
(page 35). If you do not do this, noise will be output when you play a
page 47).
DTS disc.
of the language options (such as 'DVD
densation inside the player: Allow time for condensation to
• If this unit is connected to a DTS-compatible amplifier or decoder
age' in the Setup Navigator) allow you to
rate. Avoid using the player near an air-conditioning unit.
using a digital audio cable, check the amplifier settings, and that the
r preferred language from any of the 136
c is loaded upside down: Reload the disc with the label side face
cable is properly connected.
ges listed in the language code list on
mix does not • Make sure that Audio Output Mode is set to 2 Channel if you've
8.
uper VCD that does not conform with the IEC standards might
ght or sounds
connected to the stereo inputs on your amplifier or TV (page 41).
ay normally.
ect 'Other Language'.
ete (for example,
ck that the disc is not a DualDisc or other incompatible format
e dialog).
Downloaded From Disc-Player.com Pioneer Manuals
e the / (cursor left/right) buttons
page 8).
ct either a code letter or a code
ear effect of
• Virtual Surround does not work with SACD or DVD-Audio.
All manuals and user guides at all-guides.com
All the lines that make up a video
picture are updated in one pass
(compared to interlace which takes two
passes to update the whole picture).
These associate DVD-Video discs and
players with particular areas of the
world. See DVD-Video regions on
page 47 for more information.
The rate at which sound is measured to
be turned into digital audio data. The
higher the rate, the better the sound
quality. CD is 44.1 kHz; DVD can be up
to 96 kHz. See also Digital audio.
WMA is short for Windows Media Audio
and refers to an audio compression
technology developed by Microsoft
Corporation. Files are recognized by
their file extension ".wma".
Microsoft, Windows Media, and the
Windows logo are trademarks, or
registered trademarks of Microsoft
Corporation in the United States and/or
other countries.
Super Audio CD is a high quality audio
disc format that can accommodate high
sampling rate stereo and multi-channel
audio, as well as conventional CD audio
08
all on the same disc.
08
08
>
PCM
08
53
En