___________________________________________________________________________________________________________________
Thank you for purchasing the TechGrow Humi Twin Humidity Controller. This controller is very easy to use
and can also be connected to many other TechGrow products.
Box contents
1. TechGrow Humi Twin Humidity Controller
2. Mounting kit
3. 5 Meter (UTP) cable
4. Instructions
(Temp/RH Sensor NOT included)
Features
Adjustable from 10% to 90% relative humidity.
•
Switches the humidifier and/or dehumidifier on/off by means of a 230V relay.
•
Memory for setpoint and hysteresis in case of a power failure.
•
Indicator LED indicates whether the Humi Twin is active or not.
•
Automatic detection of cable failure or poor connection of the cable to the sensor(s).
•
LCD display.
•
UTP connection.
•
Sensor not included; various sensors are available separately.
•
Possibility to connect the TechGrow Datalogger (DL-1).
•
Technical specifications
Power supply: 100 to 240 Volts (automatic)
•
Network frequency: 50 to 60 Hz
•
Consumption: 3 Watt (with sensor, without humidifier/dehumidifier)
•
Switching capacity: 1500 Watt (maximum 6A)
•
Setting range humidity set: 10% - 90% relative humidity
•
Setting range humidity +/-: 0% - 5% humidity
•
Measurement time: 1 measurement per second
•
____________________________________________________________________________________________________________________________
TechGrow
| Innovative Growing Solutions
Humi Twin
Humidity Controller
8