SF40A Printer EN-3 2. Startup Procedure 2.1 Safety Measures 2.2 Power Supply Attention If this is not the case, on no account connect the printer or the AC adapter to the power supply Only plug the adapter into a socket which is grounded.
Page 10
EN-8 SF40A Printer 2.4 Installing the printer 2.4.1 Connecting the printer to the instrument 2.4.2 Switching the printer on 2.4.3 Inserting Paper...
Page 13
SF40A Printer EN-11 Example Printout: ---------MENU-------- Settings: * List Header: * No Header Date Day: Date Month: Date Year: 2012 Time Minute: Time Hour: Date Format: * YYYY-MM-DD Time Format: * 24:MM:SS Baudrate: * 9600 Bit/Parity: * 8 Bit None 1...
SF40A Printer EN-15 7 Troubleshooting Problem / Message Possible cause Correction Timeout -------------- --------------- Over Load ------------ ------------- Under Load ------------ ----------- Transmission Error...
Page 18
EN-16 SF40A Printer Problem / Message Possible cause Correction Not Executable -------- ------ Date/Time Not Set ---- Memory Error --------- --------- Memory full --------- ---------- Load/Unload Weight Unit change not allowed! Out of range --------- ---------...
1 pcs 30529323 RS9 M/F 1 pcs Cable, 1.5 m 10 RS232C Interface The SF40A printer is equipped with an RS232C interface to connect OHAUS instruments. 9-pin male connector Matching to other devices (transmission parameters) see chapter 8.