Advertisement
31002017GB.fm Page 18 Tuesday, December 2, 2008 5:13 PM
• For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge
of the oven and the lower edge of the worktop (fig. 5). For correct operation of the appliance, this
clearance must always be unobstructed.
• If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets (A)
(fig. 6).
Electrical connection
Regulations require that the appliance be earthed.
• Connection to the mains must be carried out by a qualified electrician in accordance with the
manufacturer's instructions and in compliance with local regulations.
• The installer is responsible for connecting appliances correctly to the mains and for observing the safety
regulations.
• The oven power cable must be long enough to connect the built-in oven to the mains.
• Observance of safety directives requires that a multi-pole switch with a minimum contact gap of 3mm
be used for the installation.
• Do not use multiple plug adapters or extension leads.
• After the oven has been installed, the electrical components must be inaccessible.
18
5
6
Advertisement
