Self-Check Function; Check Of The Iic Bus Lines - Panasonic TH-65PV600A Service Manual

TH-65PV600A / TH-65PV600M

9 Self-check Function

Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
9.1.

Check of the IIC bus lines

9.1.1. How to access
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
9.1.2. Exit
Disconnect the AC cord from wall outlet.
9.1.3. Screen display
1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the Down (
time pressing the MENU button on the remote control, and the screen will show :
If the CCU ports have been checked and found to be incorrect or not located then "--" will appear in place of "O.K.".
Display Ref.No.
MEM IC1102
GC5 IC4037
GC3FS IC4020
AVSW1 IC3005
AVSW2 IC2105
Tun1 TU001
Tun2 TU002
MSP IC2106
PANEL IC9003
SD-P IC5013
HDMI IC4026
ADV IC4019
FPGA1 IC1401
FPGA2 IC1501
) button on the customer controls at the front of the set, at the same
Description
MEMORY
GLOBAL CORE
GLOBAL CORE FOR SUB
AV SWITCH
AV SWITCH
TUNER (MAIN)
TUNER (SUB)
MULTI SOUND PROCESSOR
PANEL MCU
SD PEAKS
HDMI I/F
A/D CONVERTER
FPGA1
FPGA1
28
Board
DG-Board
DG-Board
DG-Board
H-Board
H-Board
TA-Board
TA-Board
H-Board
D-Board
JG-Board
DG-Board
DG-Board
DG-Board
DG-Board