Standard Duration of Use Before Requesting Repairs (Above drawing is EX-SB 2*/AY-SB P2) Consumables Thank you for purchasing this Takara Belmont product. Disposing of this Product The instructions contained in this booklet should be thoroughly read and understood before use.
Adhere to these precautions at all times. TAKARA BELMONT is not responsible for any damage or risk to the person using this product or those around them due to accidents if this product is used without adhering to the "Safety Precautions", "Precautions for Use", "Precautions for Use of Basin Products"...
Safety Precautions WARNING Install on a stable area. Adjust the temperature of warm water while checking it by hand. Fix the basin vertically on a flat wall. When adjusting the hot water temperature, reduce After installation, check that the basin is securely the volume of hot water, point the shower head fixed.
Page 4
If the plating on the tap or thermostatic control is peeling off, immediately stop using the product This product is for barber and beauty professional and contact your local Takara Belmont dealer for use only. Do NOT use for any other services assistance.
Precautions for Use CAUTION Do NOT use a cleaning agent of strong Clean the hair catcher regularly. acid/strong alkali. Clean the hair catcher as regularly as possible. When cleaning drainpipes etc., do NOT use a If it is used without cleaning, the drain port is cleaning agent that contains caustic soda (NaOH) clogged with a buildup of hair etc., which causes or caustic potash (KOH) as its principal...
Page 6
CAUTION After use, be sure to wipe any wet Take care in handling the neck cushion. surfaces around the basin. Do NOT bring cutters and sharp objects, such as If the product is left with moisture, it may cause a scissors, (including grown nails) into contact with malfunction of the equipment or make it impossi- or press them against the neck cushion.
Check that there are no scratches, cracks, or peeling of the plated surface of the taps before using the product. If peeling is observed, immediately stop using the product and contact CAUTION your local Takara Belmont dealer. Continued operation may result in injuries. Example of peeling of the Example of scratches on the...
Name of Each Parts Unit <SINGLE TAP TYPE> DRAIN CAP SHOWER HEAD HAIR CATCHER SHOWER HEAD HOLDER BASIN MIXER PIPE STOP VALVE NECK CUSHION THERMOSTATIC CONTROL <DOUBLE TAP TYPE> SHOWER HOSE DRAIN CAP DRAIN TRAP SHOWER HEAD HAIR CATCHER P TRAP SHOWER HEAD THERMOSTATIC CONTROL KNOB HOLDER...
● If the neck fittings dowel hole is clogged with dirt, clean and remove the dirt before use. If neither of the above are appropriate and the cause still remains unknown, contact your local Takara Belmont dealer. When removing the neck cushion, remove the neck cushion from the neck fittings, and then remove the two snap buttons.
How to Use ■ Using the Shower head 1. Hold the shower head and pull it out. Shower head body Shower head holder Shower hose Shower head plate 2. After using the shower head, be sure to put it back in the shower head receptacle. Shower head holder Do not discharge a strong water stream when the shower head is in the shower head holder.
Page 11
CAUTION the tap. If the plating is peeled off, immediately stop using the product and contact your local Takara Belmont dealer. Continued operation may result in personal injury. Move the tap slowly. A quick turn of the tap may cause a noise or an abrupt change in water temperature.
Page 12
This temperature lock system is an auxiliary safety function that prevents an abrupt flow of scalding water due to erroneous operation. Contact your local Takara Belmont dealer for adjustments to the hot water supply temperature, cold/hot water supply pressures, and lock position of the thermostatic control knob.
Page 13
CAUTION during a water outage. When the drainage speed slows, there is a possibility that dust and dirt may have clogged the drainpipe. Immediately stop using the product and contact your local Takara Belmont dealer.
Guiding Customers <When shampooing> Instruct the customer to sit on the chair. Put a shampoo cape on the customer, if necessary. The following is a description of how to guide side shampoo. 3-1. Lay the customer down. Reverse the chair, support the customer's head and place it gently Face in a horizontal position onto the neck cushion.
Page 15
After shampooing and other services After shampooing and other services, get the customer up and return the chair to its original position. After use, wipe off any water on the product. -Water on the outside surface of the basin. -Water dripping onto the floor via the shower hose. In particular, when colouring material adheres, wipe immediately.
Maintenance Never use volatile chemicals, such as thinner, alcohol, remover, gasoline, and kerosene, acid, alkaline or chlorine-based detergents, antiseptic solution strongly corrosive to metals (Povidone Iodine, sodium hypochlorite, etc.), waxes containing abrading agent, sponges containing abrading agent and scrubbing brushes, or other cleaning tools. CAUTION Thinner Kerosene...
Page 17
Plating on the surfaces may peel. If you notice any peeling or scratches on the surface of the tap and any other parts, immediately stop using the product and contact your local Takara Belmont dealer. The peeling or scratched surface may injure your fingers.
Page 18
■ Shower head Turn the shower head plate to remove it; Shower head main unit then, remove the rubber gasket. Shower head plate Clean the shower head plate (with water). With a toothbrush, scrape away any lime scale and ・ dirt off the holes in the shower head plate.
Page 19
■ Cleaning strainer <SINGLE TAP TYPE> Lay some cloths (two or more towels) under the stop cock to catch drips of water. Stop cock ● If there are electrical components such as wiring in the vicinity, be sure to prevent water from OPEN ...
Daily Inspections To ensure that this product can be used for a long period of time, follow the procedures outlined in ● "Daily Check Guide" on page 24 to 25 of this instruction manual. Always inspect this product following the procedures outlined in "Daily Check Guide". Continuing to use this product without performing the daily inspections may cause malfunctions or accidents.
- Other parts (shower head, shower head holder, etc.). Disposing of this Product When disposing of this product or replaced parts, adhere with current regulations and dispose of them appropriately. After-sales Service To request after-sales service, contact your local Takara Belmont dealer.
・ Water supply pressure ≧Hot-water supply pressure supply pressure ・ Difference between hot-water supply pressure and water pressure: Within 0.2MPa (2kgf/cm ²) 19.5 kg Weight Basin unit Note: For details of the hot-water supply temperature, hot-water/water supply pressures, see the MAJOLICA PORTO Installation Instructions.
Product Dimensions (unit : mm) Top View (Single tap type) Top View (Double tap type) Front View (Single/Double tap type) Side View (Single/double tap type) Hot water supply Rc 1/2 Water supply Rc 1/2 95 90 (Above picture is single tap type) (Above picture is single tap type) ◆...
Turn on the tap and check that does not completely stop the water, the tap may the water properly runs without properly? be defective. Contact your local Takara Belmont making a strange noise. Turn off dealer. the tap and check that the water completely stops.
Page 25
Check item How to check If rejected as a result of checks Is the drain cap Check that it is not clogged with Remove a buildup of hair etc. if it appears in the hair or dirt. blocked with hair etc? drain cap.