Advertisement
BIOS UPDATE INSTRUCTIONS FOR LINUX:
1. Insert bios update USB flash drive.
2. Use Command Shell
3. Execute \Tool\LNX\afulnx32\f.sh or \Tool\LNX\afulnx64\f.sh for bios update
After bios flash finish, please reboot system
4.
BIOS Version CHECK INSTRUCTIONS:
1. Power on system and press <DEL> during POST
2. The bios version shows on the first main page
Known Issues/Workarounds
Issues fixed in this version
F03a
1. Change the SATA setting. (2019/12/18)
---------------------------------------------------------------------------------------------------------------------
F03a
1. Fine tune usb.
---------------------------------------------------------------------------------------------------------------------
F02
1. Update kernel.
---------------------------------------------------------------------------------------------------------------------
F01
1. Set recovery function.
2. Fine tune WebUI and OPRom item.
3. Support V12 BMC Firmware version.
---------------------------------------------------------------------------------------------------------------------
BIOS Release Notes
2
Advertisement
