1. Manuals
  2. Brands
  3. netvox Manuals
  4. Temperature Controller
  5. R718AD
  6. User manual

netvox R718AD User Manual

Wireless temperature sensor
Hide thumbs Also See for R718AD:

Advertisement

Table of Contents

Model：R718AD
Wireless Temperature Sensor
Wireless Temperature Sensor
R718AD
User Manual
Copyright© Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall
be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written
permission of NETVOX Technology. The specifications are subject to change without prior notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R718AD and is the answer not in the manual?

Questions and answers

Related Manuals for netvox R718AD

Summary of Contents for netvox R718AD

  • Page 1 Copyright© Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written...

  • Page 2: Table Of Contents

    Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4. Set up Instruction ..............................4 5. Data Report ................................5 6. Installation ................................8 7. Important Maintenance Instruction ......................... 8...

  • Page 3: Introduction

    1. Introduction R718AD, mainly used to detect the temperature. It collects data over LoRa network and sends it to devices to be shown, fully compatible with LoRa protocol. LoRa Wireless Technology: LoRa is a wireless communication technology famous for its long-distance transmission and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation technique greatly extend the communication distance.

  • Page 4: Appearance

     Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne  Low power consumption and long battery life Note: Battery life is determined by the sensor reporting frequency and other variables, please refer to http://www.netvox.com.tw/electric/electric_calc.html On this website, users can find battery life of various models in different configurations.

  • Page 5: Set Up Instruction

    4. Set up Instruction On/Off Power on Insert batteries. (users may need a screwdriver to open) Turn on Press and hold the function key for 3 seconds till the green indicator flashes once. Turn off (Restore to factory setting) Press and hold the function key for 5 seconds till green indicator flashes for 20 times. Power off Remove Batteries.

  • Page 6: Data Report

    2. The interval between two reports must be the minimum time(if there is special custom shipment, the setting will be changed according to customer requirements) The data reported by the device can be decoded with the Netvox LoraWAN Application Command document and http://loraresolver.netvoxcloud.com:8888/page/index Data report configuration and sending period are as following: Current Change ≥...
  • Page 7 BatteryChange Change 0x01 (2Bytes,Fixed (2bytes Unit:s) (2bytes Unit:s) (1byte Unit:0.1v) (2byte 0x00) Unit:0.01°C) ConfigReport Status Reserved 0x81 (0x00_success) (8Bytes,Fixed 0x00) R718AD 0x9C ReadConfig 0x02 Reserved (9Bytes,Fixed 0x00) ReportReq Temperature BatteryChange Reserved ReadConfig MinTime MaxTime Change 0x82 (1byte (2Bytes,Fixed (2bytes Unit:s)
  • Page 8 Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V. MaxTime Sleeping(MinTime) sleeping sleeping sleeping Wakes up and Wakes up and Wakes up and Wakes up and Wakes up and collects data collects data collects data collects data collects data REPORT 3.6V...

  • Page 9: Installation

    6. Installation This product comes with waterproof function. When using it, the back of it can be adsorbed on the iron surface, or the two ends can be fixed to the wall with screws. Note: To install the battery, use a screwdriver or similar tool to assist in opening the battery cover. 7.

Table of Contents